BBB Ethics Award Winner · AZ ROC Licensed (#271563) · 4 Phoenix Metro Shops

Locks Fixed

Door Lock Repair in Phoenix Metro

Jammed, loose, or won’t latch? We fix it right the first time so your door stays secure.

Licensed Lock Repair for Phoenix Homes and Businesses

ACME Locksmith repairs jammed and sticky locks, keys that will not turn, broken keys, misaligned strike plates, deadbolts, levers, smart locks, mortise locks, keypads, panic bars, and door closers. We are veteran-owned and Arizona ROC licensed (#271563), serving the Valley since 1997. Hiring a licensed locksmith protects you: very few Arizona locksmiths hold a contractor’s license, and unlicensed work can void insurance or leave your door easy to bypass.

Common Lock Problems We Fix

Door not latching

Door won’t latch

Usually a misaligned strike plate from a sagging door or loose hinges. We realign the door and adjust the strikes so it closes and locks securely.

Jammed antique lock repair

Jammed or sticky lock

Dirt, wear, or bad installation. We clean and realign the internals for smooth turning.

Honda ignition repair

Key won’t turn

We diagnose worn keys, bent pins, or cylinder misalignment and correct it.

Broken key extraction

Broken key in the lock

We remove the broken piece safely and cut a new key on the spot.

Lock repair

Loose locks

We tighten or replace worn parts so the lock stays solid in the door. If the screw has stripped, we can repair the holes.

Lock Installation

Deadbolt won’t lock

If the bolt does not extend or align, we adjust the bolt, hole or strike plate.

ACME locksmith repairing an old mortise lock

Repair First, Replace Only When It Makes Sense

A faulty lock leaves your property exposed. We inspect the issue and, whenever possible, repair the hardware you already have. We only recommend replacement when a lock is worn out or no longer secure, and we tell you which it is before any work.

We repair deadbolts, knobs and levers, smart locks, mortise locks, keypad entry systems, panic bars, and door closers. Need new hardware instead? See lock installation or rekey service.

What Customers Say About Our Repairs

  • Avatar Miranda McGuire ★★★★★ a month ago
    Max did a great job! I tried my best to install the new door knobs myself but was unable. He was able to fix my mess quickly and properly.
  • Avatar Y Not ★★★★★ 4 weeks ago
    Was fortunate to meet Charlie today. Had a unique latch situation and we were able to rectify it. He was easy to talk to, patient, attentive. What more could you ask for!
  • Avatar Dan Moody ★★★★★ a month ago
    Came in to the shop because the gas tank door lock was having a difficult time working. Had to wiggle and stuff to get it to work.
    Carter came out to look at the lock. Took him less than 30 seconds to figure it out.
    Took him less than
    … More five minutes to fix it.
    The he made me some new keys.
    I’m new to Arizona. I had a lock shop that I used on a regular basis in Salt Lake City.
    I have found my guys for Arizona locks.
    Yay. I can put gas in my truck and keep driving. 300,000 miles so for. 😁
    Easy peasy quick and done!!!
    Thank you Carter.
    I’ll be back with more for you later.

Lock Repair FAQ

My door won't latch when it closes. Can you fix that?

Yes. It is usually a misaligned strike plate or a sagging door. We realign the door, strike, and hinges so it latches and locks correctly.

Can you get a key out that broke off in the lock?

Yes. We extract the broken key and cut you a new one on site.

Should I repair or replace my lock?

We repair whenever the hardware is sound, which is cheaper. We only recommend replacement when a lock is worn out or no longer secure, and we explain why first.

Do you repair commercial door hardware?

Yes. We service panic bars, closers, mortise locks, and storefront hardware to keep your doors working and code compliant.

Are you licensed?

Yes, Arizona ROC #271563, veteran-owned, bonded, and insured. Very few Arizona locksmiths hold a contractor’s license.

Can you fix a door that will not latch without replacing the lock?

Usually yes. It is almost always a strike or alignment issue. We realign the door, hinges, and strike so it latches and locks again, no new lock needed.

Do you repair smart locks?

Yes. We fix smart locks that will not respond, were installed poorly, or stopped latching, and we tell you if a replacement is the better value.

Signs You Need Lock Repair

A few signs it is time to call: you have to jiggle the key to lock or unlock, the door will not latch or stay closed, the lock feels loose or spins freely, you hear grinding or feel resistance turning the key, the deadbolt does not line up with the strike, or a key broke off in the lock. Waiting usually turns a small fix into a lockout.

Door Hardware We Repair

Deadbolts

Single and double-sided, standard and high-security.

Knobs & Levers

Interior and exterior handles that are loose, stuck, or misaligned.

Smart Locks

Electronic and app-controlled locks that will not respond or install correctly.

Mortise Locks

Heavy-duty locks in commercial and older high-end doors.

Keypad Entry

Code locks that fail to unlock or have worn keypads.

Panic Bars & Closers

Exit devices and door closers that stick, leak, or will not latch.

Brands We Work On

We service the brands you already have: Kwikset, Schlage, Yale, Baldwin, Emtek, Mul-T-Lock, Medeco, and Corbin on the residential side, plus Sargent, Falcon, Von Duprin, and Adams Rite for commercial doors.

Need a Lock Repaired in Phoenix?

Call now or schedule, we fix it right the first time.

Call
(602) 422-9879
Schedule
Book & Save
Reviews
Reviews